December 30, 2022
Description
For the desktop or notice board, this one best printed with the base either in silk white or silk light silver and the text in silk black or silk dark yellow or gold.
Two gcode files at different resolutions, the 0.15mm one produces slightly better text quality.
It's the sheen of the silk PLA which gives it the edge...
Printer Brand:
Prusa
Printer:
I3 MK3S
Resolution:
0.2mm and 0.15mm
Infill:
15%
Filament: Generic Silk PLA Silk white or silk silver for the base and silk dark yellow / gold, or silk black for the text.
Notes:
There is a pause point set in both gcode files for when the filament colour needs to be changed.
If there is any stringing...
If there is any stringing encountered in the text, a fine craft knife/ #11 scalpel blade will help.
Use of a hot air blower could also help, but be careful not to heat the print too much as the print will warp - about 150Deg C and a fast airflow works well.License:
Creative Commons — Attribution
artsef
