Prusa MMU2S Rear PTFE Coupler

This is a modified version of iwagner's Prusa MMU2S Rear PTFE Holder. For the original model and instructions, visit their Thingiverse post.

Like many MMU2S owners, I had a few issues with the PTFE tube setup - in particular, their "sandwich" clamp design that fails to put pressure on all 5 tubes. iwagner's excellent design worked great, but it was pretty easy to strip the modeled-in threads with the pneumatic couplers. This version uses threaded inserts to keep everything aligned well, and prevents thread stripping. So far, it's worked great, introducing only a bit of friction into the filament path. I'm sure I could reduce that in a future redesign if it becomes an issue.

Print instructions

Bill of materials*:

200mm PTFE Tubing (2mm ID, 4mm OD)
5x PC4-M5 Pneumatic Fittings
5x M5 Threaded Inserts

*You may be able to find these parts for cheaper online. The provided links are the specific parts I had laying around.

Printing instructions:

This model uses bridge-based overhang prevention features, which allow it to be printed with no support material using the proper slicer settings. Ensure that "Detect Bridging Perimeters" is enabled, and the bridge angle is set to "automatic," or 0.

The part should print vertically, with the five hole profiles against the bed. If your slicer output does not show optimal bridges as detailed in the photos, you may want to rotate the model so the flattest area of the model is against the bed.

I printed my parts with 0.200mm layers and a 0.30mm nozzle, at 15% infill. I used Prusa's unbranded PETG, which is why the color matches so well!

Assembly instructions**:

1. Use a soldering iron to add the brass inserts to the part. Make sure you put the smooth side in first.

2. Add the pneumatic fittings and check if they're square to the part. If not, you may need to push the fittings in further with your soldering iron.

3. Cut five 30mm lengths of PTFE and push them until they fit snugly into the part. As suggested by iwagner, you may need to cut these down further until they fit inside the MMU2S housing. I would also suggest testing for any friction along the filament path during this step - you may need to file out the holes in case the insert deformed the plastic.

4. After removing the original clamp, reuse the M3 screws to attach the part to the MMU2S unit. Make sure you don't strip the plastic.

5. Before putting all your tools away, double check for any friction with a length of filament. A small "bump" in the filament path is acceptable.

**For the original instructions, check out iwagner's Thingiverse post.

Enjoy!

-Brent