Prusa MINI 90° Bed-cable mount

This is a remix of espr14's heatbed-cable cover thingy.

I made it a bit shorter, and put some slots in the back for a zip-tie.

V2 Update: 

• It's now a bit shorter, and the top is a bit thinner.
• Added a big chamfer on the front to help with print-head clearance

V3 Update: 

• Even lower profile, with proper screw- cutouts in the top.
• Cover should now stay flat and straight xD
• Removed one of the zip-tie holes in the back.
• STEP file contains PCB-model.

V4 Update:

• Added little slots for the thermistor wires on the bottom part

V5 Update 02.04.2023:

• Added lots of fillets and chamfers to make it prettier and easier to print.

V6 Update 21.02.2024:

• Added little border on the inside so it doesn't rotate around
• Updated the bottom part so it should deform less

V7 Update 23.02.2024:

• fully re-engineered bottom part so it neatly covers the terminals and doesn't deform anymore

V8 Update 04.04.2024:

• increased contact area of top part
• increased clearence for the ring terminals on the bottom part
• this helps to prevent warping when the bed is at 80°C or higher

V9 Update 12.11.2024:

• Added a countersunk version for a lower profile screw