Prusa Lack Enclosure Extended Bottom Corners

Update 9/25/23

• Added a new “plug” file with tweaked tolerances for a better fit.
• Rotated corner pieces so they're in the recommended print orientation by default.

I have my printer on top of a paving stone and wanted a little extra clearance when assembling the standard IKEA Lack enclosure. I modified the bottom corners to add ~55mm of height.

These are direct replacements for the bottom corner pieces in the original kit (the ones that attach to the legs of the top table). They retain the ability to freely lift the top table away from the bottom one.

Slots are included to allow you to still insert the door hinges from the top of the front corners. Files are included for plugs that hold the door hinges in place. You may need to slightly scale down the plugs when slicing depending on your print tolerances.

The door hinges themselves aren't included in these STLs but they are just the files from the standard enclosure with no modifications.