Super Nintendo Cartridge Insert and Dust Cover

This is for an insert for your Super Nintendo that allows you to easily play Super Famicom games without causing permanent damage to your console.

Simply remove the screws to the original cartridge mold. And use this insert whenever playing Super Famicom games. This will help the games to get a good contact with the system every time.

There is also a dust cover with the Super Famicom logo as well as one with the Nintendo logo.

The attached GCODE is for the 3 piece set using PLA.

Print instructions

Filament: PLA (Hatchbox White was used)
Layer Height: 0.20mm (first layer) and 0.15mm remainder
Infill: 15%
Infill Design: Gyroid
Top Fill Pattern: Rectilinear
Rotated: 180 degrees on X axis (to eliminate needing supports)
Supports: Not Needed
Hardened Steel Nozzle: 225 (first layer) and 220 remainder
Bed Temperature: 60 throughout
Print Time: 62 hours 53 minutes (for the 3 piece bundle)

Enabled:
Extra parameters if needed
Avoid crossing perimeters
Detect Thin Walls