MYNT 3D Station 3D Printer File Thumbnail 1

MYNT 3D Station 3D Printer File Thumbnail 2

MYNT 3D Station 3D Printer File Thumbnail 3

MYNT 3D Station 3D Printer File Thumbnail 4

MYNT 3D Station

edgett

Description Comments Tags

Description

This is a station for the MYNT3D Printing Pen Pro.

In addition to the 3D printed parts you will need:

MYNT3D Professional Printing 3D Pen with OLED Display
Overture 200mm x 200mm Adhesive Backed Build Surface. These are often included for free with Overture Filaments, but if you need more they can also be purchased as a five pack separately.
Two Rubber Grommets - 3/8" Inside Diameter, 1/2" Panel Hole Diameter, 1/4" Panel Thickness
Five M4 x 35mm Stainless Steel Button Head Hex Screws
Three M4 x 25mm Stainless Steel Button Head Hex Screws
Eight M4 Stainless Steel Nuts

Finally, you will need to laser cut a 1/4" aluminum panel using theMynt 3D Station - Base.step file. If you do not have a laser cutter capable of cutting this, you can have it cut by a service like OSH Cut. Codes for a considerable discount off your first order can be found online.

Mynt 3D Station.step andMynt 3D Station.f3d are included in case you would like to make modifications to the design. Please post any iterations as a remix/make of this original design.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Supports:

Resolution:

0.4

Infill:

20%

Filament: Hatchbox PLA Black

Notes:

Mynt 3D Station - Pen Rest.stl

* Quantity: 1x * Orientation: bottom face on print bed * Infill: 20% * Top/Bottom Layers: 4 * Walls: 3 * Supports: None

Mynt 3D Station - Foot - Back.stl

Quantity: 1x
Orientation: top face on print bed
Infill: 20%
Top/Bottom Layers: 4
Walls: 3
Supports: If your printer struggles with bridging, supports may be required. Otherwise, none.

Mynt 3D Station - Foot - Print 3X.stl