This is a retainer for 0.8" round aquarium airstones similar to those that are included with the popular HITOP dual outlet air pump.
It includes a small platform for mounting other decorations.
Print Settings
Printer Brand:
Creality
Printer:
Rafts:
No
Supports:
Resolution:
200
Infill:
Filament:
Hatchbox PLA
Black
Notes:
- IMPORTANT: Print these parts at 100% infill. Less infill may cause air to be trapped inside the part and will result in the part floating in the tank.
Post-Printing
- Seal with a coat of Krylon All-In-One Flat Clear Paint. Allow the paint to cure for at least 24 hours.
- Insert the airstone from the bottom side of the airstone retainer. The inlet barb should exit through the top hole of the airstone retainer.
- Connect the hose to the airstone inlet barb.
- OPTIONAL: If utilizing the clip, you can adhere it to the bottom of the aquarium using hot glue or other semi-permanent aquarium safe adhesive.
- Place the airstone retainer in the aquarium.
Category: Pets
edgett
