Parametric Stacking Bin

I was inspired by a recent upload to design a fully parametric stacking bin in Fusion 360. The design criteria is to setup parameters for width, depth (front to back), height and wall thickness. There are also a few other parameters for sidewall inset sizes and front lip height, label area height and filets.

Prints without support in any material.

If you are not familiar with fusion 360, you can generate a new bin model with these detailed steps once you have Fusion 360 installed and logged-in:

1. Download the .f3d
2. FIle menu ⟫ Open… (CTRL/CMD S)
3. Click Open from my computer
4. Select the .f3d file on your hard drive
5. Type SHIFT P to open parameters dialog/window.
6. Edit parameters listed below by clicking value in Expression column
7. Click OK button at bottom of parameter dialog
8. File ⟫ Save (CTRL/CMD S)
9. Give your project a name
10. In the “browser” (list left of model image) right click on the top item which should be the name you just used to save the project and pick Save As Mesh
11. Choose format of 3MF or STL, Refinement (I use High), click OK
12. Give your mesh file a name and click Save  

Twelve steps seem like a lot but it's really not that hard, I just wanted to be very detailed.