Battery case Black & Decker BDCB12B Akku (12V 1,5 Ah)

This case is meant to hold the battery  “BDCB12B” (12V 18Wh) for Black & Decker Tools. The battery holder can be attached to the wall (using adhesive tape) and the battery can be charged via USB while sitting in the case. The charging cable can be left plugged in.

Black & Decker Tools like these use the “BDCB12B” 12V Battery/Accu:
https://www.blackanddecker.de/akkusysteme/12-v-akkusystem

I printed it in PETG duo-colour with Prusa I3 Mk3+ MMU2S to match the colours of the Black & Decker tools, but it can be printed faster and with less filament in mono as well.  

Filament: PETG (PLA also possible)
Prusament PETG Jet Black (Filament 2) and Prusament PETG Prusa Orange (Filament 5) 

Nozzle: 0,40

Layer hight: 0,20

Support: print without support when placed upright on build plate 

Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments.   I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so. 
And of course a like ♥ or a rating ⭐ of the design are always welcome. 

happy printing, clamikra