Essick Humidifier Deflector

This is for an Essick Humidifier, Model #836000HB. As you can see in the images this unit pulls air in through the top then blows it out the front of the unit.  When it comes out it goes straight up and I felt like it was pulling most of the humidified air right back into the unit.  

I've been trying to learn Fusion 360 and figured this would challenge me to learn new things.

There are 2 versions of the deflector that I call Full and Half.  The full version directs the air away from the unit directly out the front.  The half version directs it up and away at a 45 degree angle.  Both work very well.  I settled on the half unit since the humidifier is in the main part of the living room and my dog refused to walk in front of it blowing air on her so I shifted to the half version.

I have included full STL's of both models for those with large enough beds to accommodate.

Left and right versions of both are provided as well so it can be printed in 2 pieces and glued together.  When printing the left and right versions, I printed them standing up on the short flat edge which worked very well.