January 8, 2023
Description
This is a simple nozzle case to store up to 38 nozzles. All 6 mm nozzles that are up to 13 mm long should fit in this case, this was specifically made for E3D v6 nozzles. If your nozzle is has an M6 thread and is no longer than 13 mm (including thread length), it will fit.
The case is held closed with four (4) small magnets (10 mm diameter by 2 mm thick) that you can buy on Amazon (about $15 for a pack of 100). I used a very small amount of glue under the magnets to ensure they will never come out.
I printed mine using two colours, but you really don't have to as it only for cosmetic reasons (readability of the text). I've included an STL file without text if you prefer.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Infill:
10%
Filament:
Sunlu PLAwhite
Notes:
Nothing special to do here, just use your normal print settings.
Designed in SolidWorks 2019
Native SolidWorks files included. Modify as you please!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Popcorn
