Anamorphic Lens Mod for Sigma 18-35mm f/1.8

This is a small mod that can be screwed to the back of the Sigma 18-35mm f/1.8 lens that makes the image appear like that of an anamorphic lens, mainly by elongating the bokeh. This effect can be seen pretty clearly in this video by "We Are Film", although the technique in this video is a filter on the front of the lens: https://youtu.be/WlA7I3u6DAI?t=156

Print Settings

Rafts:

No

Supports: 

No

Resolution:

.2

Infill: 

100

Instructions

Printing

This is a very thin model, meaning you might have to play around with the settings of your printer to get this just right. It needs to be thin enough to fit in the lens mount of whatever camera you are using. You might need to print at 99% or 101%, or it may need some slight modification to the corners or widening of the holes to make sure the screws fit it. There are numerous videos on YouTube that should give you an idea of how to mount it. Happy printing!

Category: Camera