January 2, 2023
Description
This simple organizer allows you to organize a few of the accessories used for resin printing, washing, and curing. In particular, this was designed for my combination of a Creality Halot One and Creality Wash and Cure UW-01.
The organizer holds the wash and cure mirror, two hanging brackets, a stainless steel filter and spare strainer, a spatula for removing the print from the build plate, and a toothbrush and toothpicks for removing uncured resin, and the USB stick for the printer.
The version in the photos was the original V1 version. Since then, the USB slot has been moved to a more convenient location in the corner. The model files are all for the later version.
STEP and Fusion 360 (F3D) files are included if you wish to make alterations to the design.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Hatchbox PLA Black
Notes:
I printed this on my Creality CR-6 SE at 210C (60C on the bed). I used both Magigoo and a brim to prevent corner lifting.
License:
Creative Commons — Attribution
7
edgett
