Broken pillar bookend

Bookend in the style of a broken Greek pillar. 

Size

The model is quite massive. Feel free to scale it down. However, keep the thickness of the base in mind. I would not recommend scaling below 0.7 of the original size.

Versions

There are two versions. The short is about 5cm shorter, all other dimensions are the same. 

My print settings

• 0.4mm nozzle
• 0.2 layer height
• 10% infill
• 1.2mm wall thickness
• normal supports
• uniform scaling set to 0.7
• generic white PLA