Spool with winding aid to rewind smaller spools from serger cones

To use a serger you usually need 3 to 4 spools of thread. If you don't want to buy so many cones at once you can wind the thread from one cone onto several smaller spools. This thing is an aid to use the winding tool for the bobbins on the Brother Innovis A150 sewing mashine to wind thread from big serger cones to smaller spools. It possibly works with other sewing mashines that use a simmilar size of bobbin.

The smaller end is shaped similar to a Brother SA156 bobbin.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Resolution:

0,3

Infill:

Filament: Filament PM PLA

Category: DIY