Fatshark dominator non-intrusive XT60 mod

This is a simple hack which allows you to connect an XT60 battery to the fatshark dominator goggle family without voiding your warrany.

You'll need:

• an Amass XT60H male connector,
• a 2S balancer plug,
• a 5.5mm DC jack plug,
• the printed shroud provided here.

The whole point of this 2-part print is to provide a simple case for the XT60 connector which sits firmly in your goggles, pressed against them by the head band.

The rest of the wiring you can do whatever way you want. An example is provided below.

This thing has 1 unresolved issue so far - it's harder to fit the goggles in the original case with it mounted. It's still possible, but it won't be as nice and elegant as without it.

I don't think this is going to change soon. I am more likely to come up with a different (not necessarily non-intrusive) solution later, depending on how useful this hack proves to be.

Print both parts in provided orientation.

The top part requires support.

Onshape link: https://bit.ly/2K4w8Rd