June 2, 2024
Description
No need to explain, all is in the title.
Based on Voron Stealthburner for Bambu Lab X1C/X1 Hotend by MrTelip
Update 12/11/2023 :
- Too many versions ! attempt to simplify choice table
- Fix airflow for “clone + std V6 nozzle”
Update 02/11/2023 :
- Add version to use M3x16 SHCS instead of original EEL screws
Update 12/05/2023 :
- fix TH_holder clearance (Users reports not enough clearance , Thanks elpopo, LC49 )
Update 22/02/2023 :
- Add a version HE 2mm higher (for Ali clone with CHT nozzle. Suggestion of @Controllore)
Nota : This version suits for Ali clone hotend with “Standard V6 Nozzle” which makes the mount 2mm longer than Clone HE kit (47.5mm to 49.5mm)
Update 11/01/2023 :
- TH_holder revision 4 : Add chamfer to first layer
Update 08/01/2023 :
A user report problems with square nuts thicker than the DIN562, so I made a version for this.
3 possibilities :
| Nuts thickness | Screws | Hotend | Overall Hotend length | parts to print |
|---|---|---|---|---|
| <1.8 mm | BBL screws only | Original BBL Clone | ~47.3 mm | [a]_SB_bambulab_TH_holder_r6.stl SB_bambulab_TH_front_r3.stl SB_bambulab_TH_rear_CW2_r3.stl |
| <2.4 mm | M3x16 SHCS | Original BBL Clone | ~47.3 mm | [a]_SB_bambulab_TH_holder_r6.stl SB_bambulab_TH_front_clone.stl SB_bambulab_TH_rear_CW2_clone.stl |
| Clone + Std V6 nozzle (Bondtech CHT, V6 TC nozzle, ...) | ~49.3 mm | [a]_SB_bambulab_TH_holder_r6_2mm.stl SB_bambulab_TH_front_clone_2mm.stl SB_bambulab_TH_rear_CW2_clone_2mm.stl |
Bambulab toolhead is cheap, fast to heat up/down (40s from 25°C to 270°C), had great max flow. Exists in stainless steel ans hardened steel.
The cables are pretty short.
| Category | Qty | Description | Notes |
| Hardware | 4 | M3 Heatset Insert | Standard Voron spec 4.7 mm diameter inserts |
| Hardware | 2 | M3 nut | DIN562 (square) |
| Hardware | 1 | Bambulab Toolhead or Clone | Hotend kit |
| Hardware | 2 | Bambulab Toolhead screw or M3x16 SHCS | |
| Hardware | 1 | Bambulab Heater or Clone | |
| Hardware | 1 | Bambulab thermistor or Clone | |
| Hardware | 1 | Bambulab sock or Clone | |
| Hardware | 2 | M3 x 16 SHCS | Socket head cap screw |
| Hardware | 2 | Microfit 3.0 2 pins | depends on the way you plug the TH |
Contact me on Discord @fboc
License:
GNU General Public License v3.0
7
fbeauKmi
