CR-30 Extra Part Origami Box

A fun folding origami box to store things in.  This features a magnetic lid and magnetic attachemen.  Although the magnetic attachment is not very sturdy unless you have very strong magnets.

There is a 3D printed push pin that can be used to hold the box together, but it's not very sturdy.  I would recommend using a M3x10 screw instead.

There are 2 model options:
Option 1 with the magnet pockets closed (10x3mm magnets) magnets should be inserted during the print
Option 2 with the magnet pockets open so you can glue in 10mm diameter magnets after the print is finished.

Prints without supports!