Shop Towel Wall Holder

Sick of my shop towels dragging across the bench when I grab a towel one-handed. This securely holds the box on the wall, freeing up valuable flat-thing space and making one-handed retrieval no problem.

Prints in 2 pieces on an MK3s. I used some super glue on the joint, backed up by M3x5 screws. The larger screws on the side are M5x10, meant for holding a small bungee cord in case the box popping up becomes an issue (possibly on a near empty box). With a half full box, so far they aren't needed. The cavities for the wall mount screws are specifically designed for drywall screws.

PLA+ is great here, provided this is used in a climate controlled area. Print it laying down on the bed (in the orientation it will be used) and print it so the model is solid for strength, usilizing perimeters to make the vertical walls solid. Print it hot; I use 3D Fuel Re-Fuel and print at 235c. Does require supports on one of the parts for the splicing overhang. They come off easily.