January 7, 2023
Description
This design is based from: https://www.thingiverse.com/thing:3838066
Secure Wyze Cam Pan, I just needed one that was angled a little less.
You will need a 1/4" nut and bolt to attach to the bottom of the camera. Chances are you will not find a bolt short enough to tighten the camera to the base so the nut will allow you to bottom out the bolt then tighten up to the base.
Design started from scratch with Fusion 360
Idea was based from: https://www.thingiverse.com/thing:3838066
License:
Creative Commons — Attribution — Noncommercial
ScubaSteve
