Brass Catcher for sig p320 and p365 xmacro

I think I've finalized this. I made a version that fits both a p320 and a p365 xmacro (the regular p365 doesn't have a pic rail unless you add something - I don't have this attachment). In order to work with both, it had to be taller. And to be strong, I simplified it and just made it thick.. There's room for your finger to rest on the frame. I would print the basket in TPU as it is with supports.

The rest in PETG 30% 5 walls and 4 top and bottom layers should be fine. You can do more walls and top/bottom.

I made a version that fits a pic rail for a PCC. Works great, larger basket and catcher though (because my PCC has a large-ish ejection port). Will post that separately.

You'll need some m3 x (25mm?) screws and m3 locknuts. And of course the m3x35? for the QR - can't remember but you can view the original for that hardware spec.

You can see some carbon and scorching on the front. My p365 has a comp with side ports. It's still strong and holding up fine after about 20 mags.