January 7, 2023
Description
Laserpecker 3rd axis roller tensioner arm and end stop to help keep/ hold down any glass or flask firmly on the 3rd axis roller.
This is used for both:
- Leveller: https://www.printables.com/model/361772-rotary-support-leveller-roller-3rd-axis
- Christmas Bauble: https://www.printables.com/model/362065-laserpecker-3rd-axis-roller-rotary-christmas-baubl
Hardware Required:
Nitrile Rubber O-Rings 27mm OD 22.2mm ID 2.4mm Width, Metric Sealing Gasket
Wheel into Arm: M3x12 hex screw bolt and 2 washers
Attach arm to Main body: M3x30 hex screw bolt and nut
Spring Steel Coil Extended Compressed Spring, Wire Diameter 0.039", OD 0.28", Free Length 0.79" (cut off about 2-3 twists soo not too tight.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Michael Atkinson
