January 7, 2023
Description
LaserPecker 2 Accessories Box and Lid
A test base is provided to see if the accessory parts will fit snugly into the box or not due to either printing too fast or badly calibrated printer.
A 2nd set of files are provide with "Larger Tollerance" which could help with non calibrated printers. Again a "test base" is provided to check before printing off the box in full
A Blank lid as well as a Logo lid is provided. Should you wish to have your own logo in the lid do not hesitate to contact me. Lid should also fit snugly with resistance and hence stay closed even when shaken upside down.
Accessories designed by Yi Yu will fit in the box snugly.
Box and other parts:
Accessories Box and Lid: https://www.printables.com/model/361849-laserpecker-2-accessories-box-and-lid
Ranger Probe: https://www.printables.com/model/361844-laserpecker-2-ranger-probe
Vent Deflector: https://www.printables.com/model/361845-laserpecker-2-vent-deflector
3rd Axis Support Part A/B/C: https://www.printables.com/model/361847-laserpecker-2-accessory-support-parts-abc
Please feel free to donate should you like the designs and want to support further designs for the LaserPecker series of accessories.
All items to be printed flat side down. Check the item is fully flat on the build surface.
Recommend printing slow to ensure nice holding slots for the accessories.
3 top/bottom layers and 2 walls
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
Michael Atkinson
