Baseball Cap Holder

Baseball Cap Holder

This support-free wall holder is designed to hold a baseball cap. It was inspired by other similar models but I didn't like that they all seemed to either require supports or weren't designed for command strip adhesion, so I made this.

Non-Print Materials Required

This part is designed to be mounted with a single 3M Command Large Picture Hanging Strips (16 lbs) along its back. 

Printing Advice

I printed this with 0.15 mm layer height Quality preset which I think helps ensure the smooth curved sections along the print axis are expressed. No supports are needed as all overhangs are at most 45 degrees.