January 8, 2023
Description
This is a design I made in Fusion 360 because I received a spool of ribbon that was made out of paper, and quickly fell apart. This is designed for about 5M of 18 mm wide ribbon. I will possibly made more versions to support other lengths and widths in the future!
All you need is to print 2 of the side pieces, and one of the center. I used tape to hold the ribbon to the center for winding. Hope you all enjoy!
Printer:
Elegoo Neptune 2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
0%
Filament:
Polymaker PLAMatte Black
Notes:
I printed it with 2 walls at .6mm with 5 top and bottom layers to have the sides of the spools solid. This works great, and should screw together no problem as long as you have decent tolerances!
Just some basic caliper dimensions in fusion, and 3 revisions until I had something that worked exactly how I needed and I am proud of!
Category: OrganizationLicense:
Creative Commons — Attribution — Share Alike
Sytan
