CR2032 x2 and CR2032 x 2 + CR2450 x 2 Case Updated Version

Update 28.07.2024:

Made two new versions according to my new parametric sliding box design, one for two CR2032 batteries, and one for https://www.printables.com/de/@plaid_brad_1260466, who is in need for a case for 2xCR2032 and 2xCR2450.

Two remarks on this design: 

• Best printed in PETG, as we need stron layer adhesion here.
• If you encounter difficulties opening and closing the lid because of the small bump that holds the lid closed, please consider grinding it down a bit. The 2xCR2032 case is so narrow, there is no length that the lid can flex.

Original Design:

This is a small Container for two CR2032 Cells. These Batteries are used in the Key Fob of my Car and I wanted to have 2 spare batteries stored in the car in case a Key Fob Battery gets empty while on holiday.

It was designed with Freecad (please someone should add this great Open Source Program to the list!) in about 20 minutes.

Printed in PLA on my Proforge 3D printer.

Print instructions

Unassociated tags: Car Key Fob

Category: Automotive Summary

This is a small Container for two CR2032 Cells. These Batteries are used in the Key Fob of my Car and I wanted to have 2 spare batteries stored in the car in case a Key Fob Battery gets empty while on holiday.

It was designed with Freecad (please someone should add this great Open Source Program to the list!) in about 20 minutes.

Print Settings

Printer: i3MK3s

Resolution: 0,2mm

Infill: 20%