February 14, 2023
Description
Warning
Already not printed, just requested 3h ago and I had started to work on it 1h ago. Modeling seems to be ok but it should be tested in the real life.
Definition
None.
Printing
Is required the same printer size than 3D SETS has defined.
Use the same setting than 3D SETS Licence Plates for the modified License Plates.
Change color at 4.10mm for Front Licence Plate and 2.75mm for Rear License Plate.
Build
None
Feedback
It is welcome.
Remark
None.
Version
v20230108 1st upload.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
mbe075
