Box for 3x1 car socket panel

I needed an enclosure for car electronics, so I designed it. I use it as power point on my desk. Power came from my PV system …

If you need another hole diameter or the hole in another place, let me know in the comments, I will see what I can do.

needed Parts

• 3x1 car socket panel like you see in the last picture
• 4x M3 ~10mm countersunk screws
• 1x cable gland type PG7

print instructions

• no special instructions
• if you plan to use it in warmer environment (car) you should take some more heat resisitant filament like ASA,ABS,PETg

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.