Clod Buster Wheel Adapter for Kyosho Mad Crusher

Adapter to fit ClodBuster wheels on a Kyosho Mad Crusher adding just enough offset to clear the steering knuckles.

• The bolt holes are modeled to fit over the studs on the back of original Clod Buster wheels.
• To drill the bolt holes, place the adapter in the wheel and drill 2.5mm or 3/32" holes through the wheel using the adapter as a guide.
• Remove the adapter and enlarge the holes in the wheel to approximately 3mm. I found that a 1/8" bit can be used while keeping a thin tube form the original studs.
• Mount the wheels to the rims using M3 bolts. 12mm is a good length to clear the chamfer and bite into the adapter.
• Use M5x16 bolts with blue locktite or lock washers to mount the wheels on the axles. Use M5x18 if you are using thick washers like Nord-Lock.

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2

Filament: Kodak PLA+ 
Notes:

I used PLA+, but any rigid filament should work as long as you have medium or high infill and use extra perimeters to ensure strong walls for the bolt and hex holes.

I used 35% infill with 6 perimeters.

How I Designed This

I designed this hub adapter by modifying the scad script "Customisable SLW Style Hub for RC Wheel" by jruutiai. http://www.thingiverse.com/thing:2201304