Shelf Bracket / Regalwinkel

Here we have shelf angles in 200mm. The brackets can be installed hanging or standing. There are 2 versions with sharp and rounded edges additionally there is 2 different versions of thickness (7 and 10mm). If further versions are desired and these cannot be implemented yourself, simply write to me.

For stable printing, I recommend the following parameters

Layer height: 0.2mm
- 1st layer hight 0.20-0.25
- Extrusion width: 0.4mm, forced
- Infill pecentage: >40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE
- Material: ABS/ABS+/ASA/PLA/PA/PC
- Scalable