January 8, 2023
Description
A box we use for our holiday light show. Inside is a raspberry pi 4, an esp32, a 5amp fuse, and a FM transmitter.
I haven't done the best job with wire organization, that will be a project next year!
The pi runs falcon pi player.
The esp32 runs wled. (https://www.tindie.com/products/k7bbr/wasatch-duo-controller-wwled-and-ethernet/)
The box contains cut outs for weather proof glands:
PG7 for connect pigtail.
PG11 for two Ethernet cables.
PG13.5 for RPI USBC cable (power) and 12v supply for pixels and esp32.
I used these screws for the hinge and latch mechanism: https://www.amazon.com/dp/B07JJC1KY4?ref=ppx_pop_mob_ap_share
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
npike
