Business Card Holder - Debossed

I have made a business card holder that can store up to 50x cards.

This pocket sized wonder is great for flashing out and showing off to your customers.

I have debossed an example “gins car detailing” so that you can see the potential this gives you, feel free to add your own debossed design on this canvas :D

OR print the top with a clear filament so that your customers can see through

Note: the debossed section, requires no supports and created a fantastic effect of bridges over the debossed sections. Just Deboss to 0.5mm

Be sure to use the Text tool in Prusaslicer 2.6 ;) 

Note: Blank Canvas has been uploaded :D

Printed in standard PLA, no special settings requires, just use what works best with your printer :D

I did print in the following settings with no issues using default settings,

PRUSA MINI+

0.4mm nozzle

0.15mm Layer height

No supports needed

Printables logo Instructions;

Printables logo gcode will change filament mid print on the mini. As the Mini does not support Multiple extruders, this little code will help with multi colour prints in the middle of the print, hence no color on the external of the print. Its a little tedious, but the results are great. Feel free to select up to 3 colors as per the thumbnail - enjoy