4-way drinks caddy/ carrier (small print factor)

A friend wanted a 4-way drink caddy to free up a hand. The ones I could find wouldn't fit on my Anycubic Kobra Go's small print area of 220x220x250mm so I came up with this design. The inner diameter of the cup holding sections is 80mm and the picture is of UK McDonalds drinks being carried.

Prints without supports. Some clean up required for me but due to the stock cooling on the Kobra go being a bit poor for overhangs in one direction.

Recommend 4/5 walls and reasonable infill for some strength I used 25% cubic and seems solid enough.

I printed with a brim as I have trust issues with my print bed :P  

3mf and stl available as per preference.