December 10, 2025
Description
I remixed this so I could use this LED bar light with it.
https://smile.amazon.com/dp/B0B71B9K7Z
the fit is very snug, so you'll need to gently rock the led bar as you insert it down into the holes for each side of the printer.
This requires 4 smaller size M3 bolts and 4 M3 size T-nuts to install on the printer at the top of the Z axis frame piece under the stock handle. I oriented the model so the larger part pointed down, but it should also work if you orient it to face up.
Printer:
Ender-2 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament:
GST3D PLA+White
Notes:
I used a skirt around the print to make sure the print head was primed and ready to print.
edited the source files in tinkercad to make the area around the original hole larger
I used tinkercad to remix the source files.
I used the trick for tinkercad where you take a transparent box overlaid onto the model and then selecting both shapes and merging them to slice off part of the model. I then copied the resulting partial part and then reverted to prior to before I did the merge, and moved the left side of the transparent box so it was covering the part of the model that I didn't remove, and then did a merge. I then pasted the copy of the partial model and adjusted the shape to be larger and enlarged the hole to 0.59mm to match the dimensions of the LED bar.
I exported the resulting model and then flipped the model to become the reverse side of the model and exported it as well.
License:
Creative Commons — Attribution
7
DoctorEvil30564
