Magnetic Panel for Honeycomb Storage Wall

I took an old piece of sheet metal, cut it and used it as a plate to pin magnets to the Honeycomb Storage Wall. Find the Fusion 360 project files in the download section to adapt the holders to your need.

The holders can be inserted in to an “insert-empty” from the Honeycomb storage wall by RostaP. For me the fit was rather tight. Use sanding paper or glue, if your result is different.

Naturally the pins had to be based off of hexagons. You can glue round magnets with a diameter of 1cm into the bottom of the pin. They are quite easy to get from the online marketplace of your choice.

Hints for printing

• The holder might require a brim
  to prevent tumbling