FRITZ!Fon M2 Wall Mount

Thank you for supporting me!

This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!

Design

This is a wall mount for the cradle coming with AVM's FRITZ!Fon M2. The mount comes in two parts. The back part is the one that is screwed to the wall using two screws (up to 6mm wide, with a 45 degree head). The front part is sliding down on it arranging the cable between front an back.

Once the two parts and the cable is arranged, plug the cable into cradle and place the cradle on the mount. There is an extrusion in the back matching the cradle's cable hole. This will keep the cradle from sliding around. 

Printing

Designed to be printed using a 0.4mm nozzle and 0.2mm layers.

Place the front part with the smaller bottom on the printing bed (natural orientation) and place the back part with the wall side down. Doing it like this, no support is required.