Shop Vac Reusable Dust Bag Clip

This clip design is to be used with vacs that use a bag system. The clip can be printed at any length just transform the z height to the length that best fits the end of your bags or just a part of the length of the bag. Included is a 4 inch and 8inch clip and dowel. The dowels are optional for use and for print. You can use wood dowels. Dowels are used to provide extra security for the clip. Cut one end of your dust bag. Fold the end of the bag the dowel and slide the clip in to secure the fold. Dowel is extra security to prevent the clip from slipping out. Dowel may not be necessary if you have a secure fit. Bag also may not to be folded if it is thicker and doesn't need the dowel. 

If the width of the end of the bag is long you can choose to only cut a portion of the length equal or less then the printed part. Or just a corner of the bag similar in length to the printed part. This smaller opening may be a bit more difficult to empty but will allow you to use a smaller clip or fewer clips. 

This design is not final and a test. Please let me know how well it works for you. Please comment with which vacuums you have used this on to help others. 

Thanks

3DDIY Dave