July 15, 2020
Description
This is the third iteration of a project I have been working on. This one is the best I have made yet. I wanted my Jolt blaster to be a bit more accurate so I designed a folding barrel system. You seriously feel like James Bond when holding the finished product! When firing, use your thumb to push the back of the box part for best results.
ASSEMBLY AND OPERATION:
first take your 2 3D printed parts and the screw and put the screw into the part with the T-MAN logo, put the barrel part's hinge between the two tabs on the T-MAN part.
Screw the screw in loosley, CAREFUL!!! you can break the 3D printed parts!!!!
Try rotating the barrel upward. If it doesn't swing try loosening the screw slightly.
Clip the assembled mass onto the top of the barrel of the jolt.
make sure barrel is up. load dart
swing barrel down
And you are done!!! have fun with this mod!!!
NOTE: I have just added the STL files. Remember to print in orange or red. Happy printing.
change note: just uploaded V4 let me know if it works! it hasn't been tested yet
Print using the including .gcode IN RED OR ORANGE!!! (Prusa orange works great! :])
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
8
T-MAN
