Magnetic Aqara motion sensor mount

A simple and quick to print magnetic support for Aqara motion sensor. 
Requires 4 round magnets, diameter 8mm, width 2mm (real world measurements are more like 7.8mm and 1.5mm). If you want to use other magnets size, the f3d design is included, change “magnet_height” and “magnet_diameter” parameters.

The part where the sensor is glued can be oriented 360 degrees (not really 360, but you get it). The support can be placed straight, or 90 degrees to be able to sense on the length more than on the width (useful for a corridor, as in the photos).

I use it on my door frame, as they are made of metal, instead of gluing the original support on the wall.

Don't forget to add a pause at height corresponding to the layer where magnets holes are being closed!