Revolving Nespresso capsule rack

Thanks to DominikD87 for making the rotating base which I used in this model. The capsule holder was designed by myself and can hold 30 capsules in a lean and compact manner. 

For this model, all you will need is a  35mm ball bearing and some super glue. 

Steps to assembly: 

1. Print all the parts out
2. If the holder has been printed completely in one go you would not have to glue the top to the holder. 
3. Insert the ball bearing into the bottom of the base and glue it with super glue. MAKE SURE YOU DO NOT GLUE THE MOVING PARTS OR ELSE IT WILL NOT ROTATE. 
4. Use the “Placement Template" file to glue the capsule holder exactly in the center of the base. (Do not glue the Placement templat, just use it as a guide)
5. Glue the holder and the top of the rotating platform using super glue. Make sure it is in the centre. 
6. Insert the tiny protrusion from the top base into the ball bearing. Make sure there is a tiny gap for smooth rotations 
7. Load the capsules!!!

(Glued together)                                                    (Ball bearing inserted)