Bambu Labs X1 Filament Cutter Lever for 8x3mm Magnets

UPDATE I've updated the design to make the arm a little stronger. Every arm I tested (in PLA) broke at the hinge point. Might need to be printed with ASA or CF.

 My filament lever broke. I had some 8x3mm magnets laying around, but they are too strong for the sensor. After trial and error I modified Wooddab's model to press fit the magnet from the outside of the lever. I also modified the hole diameters for the shaft and the set screw. The original part had a brass insert for the set screw, so I imaging the hole for the set screw might wallow out over time. But it's easy enough to print another one and keep going. Use at your own risk! Step and fusion models included.