Tacoma 1/4" thick (1/2" lift) Top hat strut spacer

Strut top spacer made to fit the 2005-2022 Tacoma, should also fit the 2003-2022 4Runner, 2007-2014 FJ Cruiser, and 2010-2017 Lexus GX460

The spacer is 1/4" (6.35m) thick and is the thickest that you can go safely on the factory studs. Anything longer and you will need longer studs. This 1/4" thickness will lead to 1'2" of lift, as the suspension geometry doubles (approximately) the thickness of the spacer to total lift. Simply goes on top of the factory top hats between them and the mount on the frame.

Mine are printed from Nylon, although PETG should be acceptable as well.

Disclaimer

Due to factors beyond my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this post. Use this information at your own risk. I recommend safe practices when working on vehicles and/or with any tools needed to do said work. Due to factors beyond my control, no information contained in this post shall create any expressed or implied warranty or guarantee of any particular result. YOUR MILEAGE MAY VARY. Any injury, damages, or loss that may result from improper use of the tools, equipment, or these files and this post is the sole responsibility of the user and not myself.

Category: Automotive