Bambu Lab X1C (X1/P1P(?)) magnetic poop basket

Works on the X1C, not sure if there is a magnetic backing on the X1 or P1P.

If you like it or even make one please post it, like, share, and consider a Paypal donation. Thank you!

I was tired of always having to modify the baskets according to what size magnet I had, as opposed to what the creators had, so I made one with universal fit. The lip is 2.4mm so that would probably be the minimum thickness to use, but the diameter and number of magnets are up to whatever you have and or need. Just glue them on in your preferred configuration.

As you can see from the cover photo, it works well with my other X1C mods.
https://www.printables.com/model/316644-better-bambu-lab-x1-x1c-p1p-spool-holder
https://www.printables.com/model/318624-updated-bambu-labs-x1c-100mm-exhuast-adapter
 

Printing  instructions

Recommendet settings wit a 0.4 mm nozzle:

• Material: Whatever you have laying around
• Layer height: 0.2 - 0.28 mm 
• Perimeters: 2
• Supports : I printed it without supports and it works well