Shelly H&T Case (external Power Supply)

This is a simple case for theShelly H&T sensor.

One Base is with mounting points for a step down module one is without them.

Both come with a 4mm hole for a USB Cable.

The Shelly H&T twists into the lid like in the original case

As the Shelly H&T only is rated for 3V you should use some type ofvoltage regulator!

additionaly needed:

• 4 2.9mm x 9mm screws for the lid
• 2 2.9mm x 6mm screws for the step down module if used
• USB Cable
• Voltage regulator / Step down Module

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.15

Infill:

Category: Electronics