April 1, 2023
Description
This model is best printed in TPU or another flexible filament so it still protects your hydroflask. I printed the one shown in Overture TPU at the following settings on my Prusa mk3s+:
Layer height: 0.2mm
All speeds: 20 mm/s
Infill: Infill affects how springy the base is, higher infill = stiffer boot.
Retraction: 0.8mm
Cooling: Off
Bed Temp: 50 C
Nozzle Temp: 230 C
License:
Creative Commons — Attribution
11
hikree
