Meaco DD8L Junior Dehumidifier Wall Mount Brackets

Wall Mount Brackets for the Meaco DD8L Junior Dehumidifier

To fit do the following;

Remove the 4 screws from the floor mount and remove it. 

Attach the bottom brackets to the bottom of the Dehumidifier using the original screws.

Hold up to the wall making sure it is level and mark the 4 holes for the wall screws.

Remove the brackets again and drill and affix it to the wall using the screw holes in the brackets (use appropriate wall fixings).

Once secure align the screw posts onto the brackets and use the original screws to affix the Dehumidifier back to the brackets.

Align the Top Tabs to the top lip of the Dehumidifier and affix to the wall.

I printed with PLA at 0.2mm with 60% infill with support.

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 Pro

Rafts:

No

Supports: 

Yes

Resolution:

0.2mm

Infill: 

60

Filament: Eeyone PLA Carbon Black

Category: Household