Yeti Rambler 14oz TPU Sleeve / Bottom

I printed this with Amazon basics TPU.

https://www.amazon.ca/gp/product/B07H9KNPNL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Printed with supports everywhere (even though they are a pain to get off)

This STL will need supports for the handle opening, and the curve on the bottom.

I printed with a 0.6 nozzle and a standard generic FLEX profile, with slightly modified temperature settings, supports everywhere and had 15% infill set even though it is too thin to require infill.  (didn't actually check the slicer to see if it used infill anywhere)