January 16, 2023
Description
This is for the secure mounting of the LILYGO POE esp32 board and a BME/BMP 280 sensor board.
The main case, with brass inserts, allow the board to screwed in, exposing only the POE port to the bottom of the case. The lid snaps into place firmly and also supports brass inserts for screwing in a BMP280 sensor board, with an exposed channel to allow the environment to be monitored.
There are two openings at the top which allow the passthrough of any other external wiring to the GPIO header or the USB-C port. There is a blank and a model with a 12mm hole. These also snap into place pretty firmly.
Highly recommend soldering the programming header in the manner shown in the photo to make it easier to attach the programmer and clearance in the case.
Would love to see how you use it!
https://github.com/Xinyuan-LilyGO/LilyGO-T-ETH-POE
License:
Creative Commons — Attribution
8
AuroraProjects
