Lamp Holder Attachment

Lamp holder for attaching lamp to a table or a shelf.
Diameter of my steel rod part is 6.75mm. It fits pretty tight but I was able to fit it just by hand (no tool used).

I recommend to stick some adhesive material to the female part bed (e.g. bicycle tube or some other gum).

Print instructions

I successfully printed and fitted all parts in PETG with no supports.
My print recommendations for PETG:

• male part: 100% infill, layer height 0.2mm.
• female part: 20% infill is sufficient, layer height 0.2mm.
• bottom bracket: better 100% infill as this part can be heavily forced
  Nozzle temperature was 250°C, bed temperature 90°C