Broom Holder R2

I saw broom grippers in store the other day so I challenged myself to design my own

You can choose between 3M strips, double side tape* or screws* to install it

• However i have not tested the versions that uses double side tape or screws

Guess mine aren't as good as the real stuff but it works for me ;-)

• The gripper does not always spring back to the original position
  • Simply pull the broom slightly diagonally

Print Settings (PrusaSlicer 0.20mm Quality) 

• Nozzle diameter : 0.40 mm
• Layer height : 0.20 mm
• Perimeters : 3
• Gripper 
  • Filament : TPU90, TPU95 (TPU98 maybe not)
  • Solid layers (top and bottom) : 4 
  • Infill : Gyroid, 20%
• Holder
  • Filament PETG (PLA maybe not)
  • Support on build plate only
    • Support style : Snug
    • XY separation : 100%
• Clamp and Pin
  • Infill : Rectilinear, 100%

Change Log

• 2024-12-16 Broom Holder R2
  • Added a revised version of the Gripper 
• 2023-02-03 as requested by Sasa Pantelic
  • Added a wall mount with the flat back side
    • So you can use double-sided tape in all shapes